-
Flame Retardant
- Halogen Flame Retardant
- Phosphorus Flame Retardant
- Nitrogen Flame Retardant
- Silicon Flame Retardant
- Aluminum-Magnesium Flame Retardant
- Antimony Flame Retardant
- Boron Flame Retardant
- Expandable Graphite
- MOF Flame Retardant
- Nano Flame Retardant
- Hyperbranched Polymer Flame Retardant
-
Functional Flame Retardant
- Composite Flame Retardant for PA
- Composite Flame Retardant for PP
- Composite Flame Retardant for PBT
- Composite Flame Retardant for PVC
- Composite Flame Retardant for PU
- Composite Flame Retardant for Silicone Rubber
- Composite Flame Retardant for Epoxy Resin
- Composite Flame Retardant for TPU
- Composite Flame Retardant for TPE
- Cotton Durable Flame Retardant
- Polyester Durable Flame Retardant
- Semi-durable Flame Retardant
- Non-durable Flame Retardant
- Others
- Smoke Suppressant
- Flame Retardant Polymer
- Flame Retardant Masterbatch
ADP-13 (Aluminum Diethyl Phosphinate)
InquiryDensity | approx. 1.35 g/cm³ |
Appearance | white powder |
Storage | The product should be stored in a dry place at room temperature. |
Bulk Density | approx. 300 - 500 kg/m³ |
Content | Phosphorus, 23.0 - 24.0% |
Decomposition Temperature | > 350 °C |
Feature | Non-hygroscopic, not hydrolyzed and not precipitated Suited as flame retardant for thermoplastics and thermosets High efficiency due to its high phosphorus content UL 94 V-0 rating down to 0.4 mm thickness Excellent heat stability in machining, suited for processing temperatures up to 350 °C Suitable for both glass fiber reinforced and unreinforced grades The flame retardant polyamide compounds exhibit very good physical and excellent electrical properties Suitable for lead free soldering Good colorability Non-halogenated flame retardant with favorable environmental and health profile |
Moisture Content | max. 0.5% |
Notes | Before incorporating ADP-13, it is important to predry the polymer as usual. However, predrying (e. g. 4h at 120 °C) is recommended, if even very low moisture contents must be avoided. The mixing and processing methods customary in powder processing of polymers can be used with ADP-13. The optimum conditions for incorporating should be determined in each individual case. Care must be taken to ensure homogeneous dispersion of all components. The temperature of the polymer melt should not exceed 350 °C. |
Packaging | 25 kg /bag |
Pore Size | ≤ 10 µm(D50); ≤ 30 µm(D97) |
If the product of interest is not available in our catalog, please contact us to see if there is any relevant stock or other purchase channels.